DD Audio DSI-2 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DD Audio DSI-2. DD Audio DSI-2 14 pages.

Imprimer la page

PC INTERFACE CONTROLS (continued)

• Frequency: The center of the frequency

range to be cut or boosted.

• Gain (dB): The amount of boost or cut.

• Q Factor: The "sharpness" of the boost or

cut, higher Q, means a narrower range of

frequencies will be affected.

c. LS Button: Activates a Low Shelf filter for

EQ Band 1. A low shelf EQ filter has an

adjustable center frequency and will

boost/cut parameters below the center

frequency. Roll-off rate is selectable as 6dB

or 12dB per octave.

d. HS Button: Activates a High Shelf filter for

EQ Band 10. A high shelf EQ filter has an

adjustable center frequency and will

boost/cut parameters above the center

frequency. Roll-off rate is selectable as 6dB

or 12dB per octave.

e. Bypass EQ/Restore EQ Button: Allows

you to momentarily bypass then restore

EQ adjustments.

f. Reset EQ Button: Resets all EQ

adjustments.

4. Time Alignment Settings: To compensate for

various speaker locations and listening

positions, time delay adjustments can be made

to the output channels. By doing this you can

make every speaker's musical playback reach

the listener's ears at the same time to create a

realistic, "concert-like" sound stage.

5. Main

6. Input/Output Channel

7. EQ Display/Input Signal

DD AUDIO / DSI-2 /

Graphically displays the selected output

channel via a highlighted speaker image and

allows you to input the amount of desired

delay for that channel.

Allows you to select the desired unit of

duration for the delay Milliseconds(Ms),

Centimeters(Cm), or Inches(In).

See page 9 for detailed Time Alignment

Instructions.

Volume: Adjusts the volume of all

outputs evenly.

this window you can adjust the output dB level,

select the desired input channel/s, switch

phasing, mute, and link output level controls for

the selected output channel.

See page 10 for detailed Input/Output

Configuration and Summing Instructions.

button to switch the top window between the

EQ Display and Input Signal control panels.

Configuration: From

Button: Use this