CopperOptics 150-1218-02 Manuel - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} CopperOptics 150-1218-02. CopperOptics 150-1218-02 19 pages. Remote unit
Imprimer la pageSection 150-612-100
Revision 02
Message
ALARMS
NONE
No Alarms
LLOS
Local Loss of Signal
RLOS
Remote Loss of Signal
LOSW
Loss of Sync Word
HES
VHDSL Loop Errored
Second
DS1
Digital Service 1
R(L)AIS
Alarm Indicating Signal
LOOPBACKS
SMJK
Smartjack Loopback
NREM
Network Remote
Loopback
NLOC
Network Local Loopback
CLOC
Customer Local Loopback Loopback at HRU (local) towards CI initiated by intelligent line
CREM
Customer Remote
Loopback
ARM
Armed
TLOS
Transmit Loss of Signal
Page 14
TABLE 4. HRU-612 STATUS MENU DEFINITIONS
Full Name
No signal from local T1 interface
No signal from remote T1 interface
The VHDSL loops has lost sync.
The VHDSL CRC errors have exceeded the user selectable ES
threshold
BPV's have exceeded the user selectable ES threshold.
Indicates an AIS (all 1's) pattern is being transmitted from the
remote(R) or Local (L) T1 output port.
Loopback at HRU towards network initiated by 2 in 5 in-band
loopback code or out-of-band ESF data link code. See Figure 5.
Loopback at HRU (remote) towards network initiated by intelligent
line repeater code, HRU or HLU front panel push-button or
maintenance terminal . See Figure 5.
Loopback at HLU (local) towards network initiated by intelligent
office repeater code or HLU front panel push buttons or
maintenance terminal. See Figure 5.
repeater code or HLU front panel push buttons or maintenance
terminal. See Figure 5.
Loopback at HLU (remote) towards customer initiated by
intelligent office repeater code or HLU front panel push buttons or
maintenance terminal. See Figure 5.
HiGain-2 has detected the intelligent repeater loopback (2 in 5)
arming code.
HRU is in its TLOS initiated loopback state.
Description