DDMALL HE-20IR Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DDMALL HE-20IR. DDMALL HE-20IR 7 pages. Hdmi extender with ir

Imprimer la page

Note

Please connect the USB cable to the power supply before using the IR



control.

When using the remote control function, please make sure its distance is



within 6 meters and without obstructions.

Incorrect placement of IR Receiver and IR Blaster cables may result in



cable failures. Please check carefully before plugging in the IR cables to

the respective IR sockets.

IR User Guide

IR Receiver Cable

(Control to IR In of USB RX Cable)

IR blaster extension cable should plug in the IR port of USB TX cable,



and the IR receiver extension cable should plug in the IR port of USB RX

cable.

The emitter of IR blaster should as close as possible to the IR receiver



window of the signal source device.

The control signal will be better when your controller is pointed at the IR



receiver head directly.



When connected to control system, ensure the IR emitter is over against

the IR receiver's raised side instead of its flat side.

Indicator Light

Status

Flash

Keeps On

DDMALL HE-20IR User Manual

Green Light

Power Normal

IR Blaster Cable

(Connect to IR Out of USB TX Cable)

Yellow Light

Transmit Non-HDCP Signal

Transmit HDCP Signal