Gallien-Krueger 400RB/112 Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gallien-Krueger 400RB/112. Gallien-Krueger 400RB/112 16 pages. High-current bass amplifier
Imprimer la page
Your new 400RB Series Bass Amp has been factory
.
configured for use with:
120 Volt/60Hz 20 Amp circuit for USA &
.
Canada.
230 Volt/50Hz 10 Amp circuit for Europe
.
& Australia.
100 Volt/50Hz 20 Amp circuit for Japan.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with specifications
other than indicated above can create a safety and fire
hazard, and may damage the amplifier. If you have any
questions about the voltage requirements for your
specific model, or about the line voltage in your area,
contact your dealer before plugging the unit into a wall
outlet.
The high power output of your amplifier may require
heavy current draw under Full-Load conditions. To
insure proper performance and avoid potential safety
hazards, we recommend connection to line circuits with
Amperage specified "as above". Connecting multiple
amplifiers to the same circuit, or connecting the ampli-
fier to the same circuit used by other heavy-power
devices, such as high-wattage lights, may cause circuit
breakers to trip. It is always a good idea to avoid using
any audio equipment on the same AC circuit as equip-
ment with motors, such as air conditioners or refrig-
erators. This will lessen to possibility of power
variation and electrical start-up noise affecting your
sound.
To avoid safety hazards, use only the power cord
supplied with your unit. If a replacement cord is
used, make certain that it is of consistent quality
and gauge as the original. We do not recommend
using extension cords with this product. As with all
electrical devices, do not run power cords under
rugs or carpets or place heavy objects on them.
Damaged power cords should be replaced immedi-
ately with cords meeting factory specifications.
When disconnecting the power cord from an AC
outlet, always pull the plug, never pull the cord. If
you do not intend to use the amplifier for a consid-
erable length of time, disconnect the plug from the
AC outlet.
There are no user-serviceable components inside
this product. Opening the amplifier enclosure may
present a shock hazard, and modification to the
product will void your warranty. If liquid enters the
unit, or any metal object such as a paper clip, wire,
or staple accidentally falls inside the enclosure,
disconnect the unit from the AC power source
immediately and consult an authorized service
station.
The carton and packing materials used in shipping
your new amplifier were specially designed to
cushion it from the shocks and vibration that occur
during transport. We suggest that you save the
carton and packing materials for use in shipping,
in the event you move, or the amplifier needs repair.