Gallien-Krueger Backline 210 Manuel du propriétaire - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gallien-Krueger Backline 210. Gallien-Krueger Backline 210 17 pages. Backline series
Également pour Gallien-Krueger Backline 210 : Manuel du propriétaire (16 pages)
Imprimer la page
.
To insure proper operation and to avoid
potential safety hazards, place the unit on a
firm, level surface. When installing the unit
in a rack, be sure the mounting hardware can
support the amplifier's weight. To save space in
your rack, the Backline's feet can be removed
.
using a Philips head screwdriver.
Make certain that proper space is provided
for ventilation(at least one inch above). If the
amplifier will be installed in a rack or
other enclosed area, make sure that there is
sufficient air movement within the enclosure to
allow proper cooling. Consult your dealer for
.
more information.
For combos, make sure there is three feet of
clearance around the sides, top, back and front,
of the unit for maximum ventalation.
.
Avoid installation in extremely hot or cold
locations, and areas that are exposed to direct
sunlight, or near heating equipment.
. .
Avoid moist or humid locations.
Remember, power amplifiers generate heat.
The heat sink fins and ventilation slots that
form part of the enclosure are specially
designed to remove this heat. Placing other
electronic equipment near these heat-
dissipation systems may possibly affect the
long-term reliability of both your amplifier and
the other equipment.
The Backline combo series should always be used as a
floor standing unit. These combos are not intended for
stacking or table-top placement.
Before moving the unit, be certain to disconnect any
interconnection cords with other components, and make
sure that you disconnect the unit from the AC outlet.
When the unit gets dirty, clean only with a dry cloth.
Never use benzene, thinner, alcohol, or other volatile
cleaning agents. Do not use abrasive cleaners, as they
may damage the finish of metal parts. Avoid spraying
insecticides near the unit.
Your new amplifier is rugged. It was built to give you
years of trouble-free operation, if it is operated in accor-
dance with the instructions contained in this manual.
The only maintenance required is cleaning. If you are
going to move your amplifier around frequently, we
recommend a road case to protect it from scratches and
road wear.