Gallien-Krueger Fusion 550 Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gallien-Krueger Fusion 550. Gallien-Krueger Fusion 550 12 pages. Gallien-krueger fusion 550: user guide
Également pour Gallien-Krueger Fusion 550 : Manuel du propriétaire (12 pages)
Imprimer la page
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Verify Line Voltage and Amperage:
amplifi er has been factory confi gured for use with
the following:
120 Volt/60Hz 15 A circuit for USA/Canada.
240 Volt/50Hz 10 A circuit for UK/Australia.
230 Volt/50Hz 10 A circuit for Europe.
100 Volt/50Hz 15 A circuit for Japan.
220 Volt/50Hz 10 A circuit for Korea.
Verify AC Circuit Capacity Before Use: The high
power output of your amplifi er may require heavy
current draw under full-load conditions. Connecting
the amplifi er to a line with specifi cations other than
indicated above can create a safety or fi re hazard and
may damage the amplifi er. Connecting to the same
circuit used by other heavy-power devices, such
as high-wattage lights, may cause circuit breakers to
trip. It is always a good idea to avoid using any audio
equipment on the same AC circuit as equipment with
motors, such as air conditioners or refrigerators. This
will lessen the possibility of power variation and elec-
trical start-up noise affecting your sound.
AC Power Cord: To avoid safety hazards, use only
the power cord supplied with your unit. If a replacement
cord is needed, make certain to use a standard IEC
compliant cord. Damaged power cords should be
replaced immediately. When setting up, make certain
that the AC plug is easily accessible. If you do not intend
to use the amplifi er for a considerable length of time,
disconnect the plug from the AC Mains Socket.
Earth Ground Connection: To prevent electric
shock, do not remove the grounding plug on the
power cord, or use any plug or extension cord
that does not have a grounding plug provided.
Make certain that the AC outlet is properly
grounded as well. Do not use an adapter plug
with this product.
Fusion 550 Bass Amplifi er
Your new
4
Do Not Open the Amplifi er Enclosure: There
are no user-serviceable parts inside this product.
Opening the amplifi er enclosure may present a shock
hazard. Modifi cation to the product will void your
warranty. If liquid enters the unit, or any metal
object such as a paper clip accidentally falls inside
the enclosure, disconnect the unit from the AC power
source immediately and consult an authorized service
station.
Setup: To insure proper operation and to avoid
potential safety hazards, place the unit on a fi rm, level
surface. Do not plug or unplug the instrument or
speaker cable while the amplifi er power is on.
Heat & Ventilation: Air fl ows from back to front of
the unit , make sure there is at least 8 inches of clear-
ance on top, sides and back of the amplifier, in the
event that the unit is rack mounted, maintain an 8"
clearance on the back and front of the unit, 1.75"
or one rack space on top and bottom. Avoid using
in extremely hot or cold locations and areas that are
exposed to direct sunlight or near heating equipment.
Avoid using in moist or high humidity areas.
Cleaning & Maintenance: Clean only with dry cloth.
Never use benzene, thinner, alcohol, or other volatile
cleaning agents. Do not use abrasive cleaners, as they
may damage the fi nish of metal parts. Avoid spraying
insecticides near the unit. No other maintenance
should be necessary.
Traveling: If Traveling with the unit frequently, we
recommend a road case or cover to protect it from
scratches and road wear.
Packaging: The carton and packing materials used in
shipping your new amplifi er were specifi cally designed
to cushion it from the shocks and vibration that occur
during transport. We suggest that you save the carton
and packing materials for use in shipping, in the event
you move, or if the amplifi er needs repair.