Gallien-Krueger MB2 500 Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gallien-Krueger MB2 500. Gallien-Krueger MB2 500 13 pages. Mb2 series
Imprimer la page
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Verify Line Voltage and Amperage: Your new
MB² Series Bass amplifier has been factory con-
figured for use with the specific line voltage for
your location:
120 Volt/60Hz 15 A circuit for USA/Canada.
240 Volt/(50/60Hz) 10 A circuit for
UK/Australia.
230 Volt/(50/60Hz) 10 A circuit for Europe.
100 Volt/50Hz 15 A circuit for Japan.
220 Volt/50Hz 10 A circuit for Korea.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with specifi-
cations other than indicated above can create safety
and fire hazard, and may damage the amplifier.
If you have any questions about the voltage
requirements for your specific model, or about the
line voltage in your area, contact your dealer
before plugging the unit into a wall outlet.
Verify AC Circuit Capacity Before Use:
The high power output of your amplifier may
require heavy current draw under full-load con-
ditions. To insure proper performance and avoid
potential safety hazards, we recommend connec-
tion to line circuits with amperage specified "as
above". Connecting to the same circuit used by
other heavy-power devices, such as high-wattage
lights, may cause circuit breakers to trip. It is
always a good idea to avoid using any audio equip-
ment on the same AC circuit as equipment with
motors, such as air conditioners or refrigerators.
This will lessen the possibility of power variation
and electrical start-up noise affecting your sound.
Please refer to page 10 for more instruc-
tions concerning installation.
MB² SERIES
AC Power Cord:
To avoid safety hazards, use only the power cord
supplied with your unit. If a replacement cord is
needed, make certain to use a standard IEC
compliant cord. Damaged power cords should
be replaced immediately. When setting up, make
certain that the AC plug is easily accessible. If you
do not intend to use the amplifier for a considerable
length of time, disconnect the plug from the AC
Mains Socket. Do not use an extention cord.
Earth Grounding Connection:
To prevent electric shock, do not remove the
grounding plug on the power cord, or use any plug
or extension cord that does not have a grounding
plug provided. Make certain that the AC outlet
is properly grounded as well. Do not use an
adapter plug with this product.
Do Not Open the Amplifier Enclosure:
There are no user serviceable parts inside this
product. Opening the amplifier enclosure may
present a shock hazard.
product will void your warranty.
enters the unit, or any metal object such as a
paper clip accidentally falls inside the enclo-
sure, disconnect the unit from the AC power
source immediately and consult an authorized
service station.
Setup:
To insure proper operation and to avoid
potential safety hazards, place the unit on a firm,
level surface.
instrument or speaker cable while the amplifier
power is on.
Heat & Ventilation:
Make sure there is space provided for proper
ventilation. Avoid using in extremely hot or
cold locations and areas that are exposed to
direct sunlight or near heating equipment. Avoid
using in moist or high humidity areas. NEVER
BLOCK THE FAN VENT HOLES ON
THE SIDES OF THE UNIT.
4
Modification to the
If liquid
Do not plug or unplug the