Frigidaire Designer Series Manuel d'utilisation et d'entretien - Page 8

Air Conditioner Features

(continued)

SLEEP FEATURE:

DO THIS:

PRESS SLEEP

BUTTON

CHECK FILTER FEATURE:

TO TURN UNIT OFF:

DO THIS:

PRESS ON/

OFF BUTTON

SZ000728(En)-Yaokong

YOU WILL SEE:

Note: In this "MODE" the selected temperature will increase by

2 degrees F 30 minutes after the mode is selected. The

temperature will then increase by another 2 degrees F after an

additional 30 minutes. This new temperature will be maintained

for 7 hours before it returns to the originally selected

temperature. This ends the "Sleep" MODE and the unit will

continue to operate as originally programmed. The "Sleep"

MODE program can be cancelled at any time during operation

by again pressing the "Sleep" button.

YOU WILL SEE:

Note: This feature is a reminder to clean the Air Filter (See

Care and Cleaning) for more efficient operation. The LED (light)

will illuminate after 250 hours of operation. To reset after

cleaning the filter, press the "Check Filter" button and the light

will go off.

LIGHT On

09/20/2005, 5:30 PM