Gallo Tech GTS-2 Manuel d'utilisation et d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Gallo Tech GTS-2. Gallo Tech GTS-2 15 pages. Keyless rfid push button start & security system
Imprimer la pageM
ute Button: Silent-(Arm/Disarm)/Remote-Lock/Siren-Stop
a.) Silent Arm:
When in disarmed mode press
button will flash slowly, the siren will not chirp, the doors will lock and system will be in armed mode. If a
door is not closed when pushing the
times and the system will stay in the armed mode. When the door is closed the system will be in the
armed mode. (See "Functions Options" Table 1).
Shock Sensor will become active after 15 sec.
Siren stop: When the alarm siren is triggered, pressing the
sounding and the system will stay in the armed mode. Pressing the
and unlock the doors.
b.) Silent Disarm:
When in the Silent Armed mode, press
twice.
S
iren Button: Auto Door Lock/Unlock/Car-Locating/Anti-hijack
a.) Auto Door Lock/Unlock enable or disable:
When the system is in the disarmed mode, pressing and holding
RFID auto door lock/unlock function. (parking lights flash 1 time when disabled or parking lights will flash
3 times when enabled )
While driving, pressing the
If the alarm has been triggered, pressing the
armed mode.
b.) Car Locating:
When the system is armed, holding this button for more than 2 seconds, the siren will chirp and the
parking lights will flash five times.
c.) Anti-Hijack:
When the engine is running, holding the
twice and Anti-Hijack mode will be started.
After 40 seconds, the system will enter armed mode, siren will chirp (non-continuous) for 20 seconds. For
another 60 seconds, the parking lights will flash and the Engine will turn OFF. At this time the system
will stay armed.
Pressing the
will not turn off the anti Hi-jack function.
NOTE: The Anti Hi-Jack function can be turned OFF (disabled) by resetting the Anti Hi-jacking
programming option in Table 1 "Function Option Chart". In the OFF setting, Anti Hi-jacking
can note be invoked.
d.) Light / Heavy Shock Sensor Programming
Within 3 sec after Arming, press the
No. of times to press
button
1
2
3
4
button is not pressed within 3 sec of entering the armed mode the program will
If the
automatically enter the light/heavy shock mode.
© Copyright Gallo Technologies. All Right Reserved
one time, parking lights flash once, Blue L.E.D. on the Engine Start
button will only lock the doors.
button or the valet will release the triggered Anti-Hijack mode to the disarmed mode, but
Function
OFF light shock
OFF light/heavy shock
ON light/heavy shock
ON light shock
button, the siren will chirp and the parking lights will flash 3
button or the
one time will unlock the doors and the parking lights will flash
button will stop the siren. The system will remain in the
button for over 2 seconds, the parking lights will flash
button to program light / heavy shock sensor sensitivity.
Description
Park lights flash 1 time
Siren chirps 1 time
Park lights flash 2 times
Siren chirps 2 times
Park lights flash 3 times
Siren chirps 3 times
Park lights flash 4 times
Siren chirps 4 times
- 4 -
button will stop the siren
button will disarm the system
for 2 sec will enable or disable the
Remark
Siren does not chirp if in
Silent Arm mode
Rev. V8.2- 20212