Gallo Tech GTS-3RS Manuel d'utilisation et d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Gallo Tech GTS-3RS. Gallo Tech GTS-3RS 16 pages. Keyless rfid push button start & security system

Imprimer la page

1. Installation Instructions

1.5 FUNCTION OPTIONS

GTS-3RS has numerous user programmable features that can be enabled or modified according to user's

preferences.

This section explains each of the user configurable functions.

See Sec. 1.6 "Key FOB &

Programming Function Set-Up Options" for details on how to modify programmable features.

Valet Mode: In DISARM mode, Pressing the valet switch for over 5 seconds will activate valet mode. Siren will chirp

2 times and the green "Start Stop Engine" button LED will stay ON (not flashing).

To deactivate valet mode (normal status), press the valet switch for over 5 seconds. The siren will chirp one time

and the green "Start Stop Engine" button LED will flash slowly.

In Valet mode all alarm function and auto door locking will be disabled. The key FOB buttons can lock and unlock

doors, but not the trunk or auxiliary output. If the key FOB is in range, the vehicle can be started with the "Start Stop

Engine" button.

See Table 1 "Function Option Chart" (page-9)

1. Remote Start Enable/Disable:

Remote Start Enabled (default): Engine can be started using Remote Start function.

Remote Start Disabled (optional): Engine can not be started using Remote Start function.

2. Remote Start Run Time:

Run Time 10 minutes (Default). When the engine is started using remote start, the engine will automatically turn

OFF after 10 minutes.

Run Time 15 minutes (optional). When the engine is started using remote start, the engine will automatically turn

OFF after 15 minutes.

3. Gasoline or Diesel Engine:

Gasoline Engine (default): When the engine is started with Remote Start, there will be a 0 sec delay after the Ign1

turns ON before the started is engaged.

Diesel Engine (optional): When the engine is started with Remote Start, there will be a 15 sec delay after the Ign1

turns ON, before the starter is engaged.

4. Ignition 2 output Enable/Disable during Engine start:

Disabled (default): IGN2 output is OFF during the engine start sequence and ON after the engine is started.

(Duplicates the action of ACC).

Enabled: IGN2 output is ON during the engine start sequence and stays ON after the engine is started. (Duplicates

the action of IGN1).

5. Silent Arm/Disarm:

ON (default): Siren does not chirp when locking / unlocking the doors.

OFF: Siren chirps when locking / unlocking the doors.

6. Foot-Brake Door lock/unlock:

ON (default): 15 seconds after starting the engine the doors will automatically lock when the foot brake is pressed.

Doors will automatically unlock when the engine is turned OFF.

OFF: After starting the engine the doors will not automatically lock.

7. Auto Rearm:

OFF (default): The system will not automatically rearm and relock itself after the system has been disarmed by

pressing the trunk release or auxiliary output button. The system can be rearmed by pressing the

(lock button) 1

time.

ON: The system will automatically rearm and relock itself 15 seconds after the system is disarmed by pressing the

trunk release or auxiliary output button

8. Auxiliary output Time:

2 Sec (default) Auxiliary output pulse length set to 2 sec. Use this setting if unlocking passenger shaved doors

15 Sec (optional) Auxiliary output pulse length set to 15 sec. Use this setting for a window close operation.

- 7 -

061515V54RS