HighTek HK-880 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HighTek HK-880. HighTek HK-880 19 pages. Serial device server

Imprimer la page

www.szhightek.com

RJ45-Link

Link status

2.2.4 Equipment start-up and Reset switch operation

HK-880 provide Reset switch, it can be used to recover plant setup manually without enter HK-880

Power start-up step on the equipment

Connect DC IN interface and 5VDC power plug, PWR red LED is bright, Ethernet LINK LED is bright, then break, after

about 10 seconds(under normal start-up), TX/RX serial interface LED are twinkle 3 times, the system have finished initializtion

process

Note; if you want to start quickly, you can set to high speed start-up

Reset operation step:

① press Reset key

② connect the HK-880 power, PWR red LED is bright

③ Wait for about 10 seconds, TX/RX LED is twinkle frequently, it mean the parameter recovered to plant setup, then

break and reconnect

Chapter 3 Manager method

3.1 Equipment manager method

HK-880 series serial device server can used Web browser, Telnet and Console to collocate and maintain, it can choose

corresponding manager style according to the status

3.1.1 Web browser management

Confirm to HK-880 serial device server and net are connect normally and keep it in the same net range with the

computer what equipment you want to enter, if you don't know the equipment IP, you can used Console control plate and

dummy serial software to search the equipment IP. Enter HK-880 IP to the Web browser then the enter interface occur as

below:

HK-880 default IP: 192.168.0.200, enter default user name: admin, and password: admin, then enter into collocation

interface as picture:

Normally on：Ethernet connecting orifice and net are connected

normally

green

Normally off：Ethernet connecting orifice and net don't connected

Shenzhen FangXingLiuTong Industrial Co.,Ltd