GALLUNOPTIMAL SPRINT80+ Mode d'emploi - Page 2

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} GALLUNOPTIMAL SPRINT80+. GALLUNOPTIMAL SPRINT80+ 2 pages.

Imprimer la page
Calibrate the soldering tip temperature: Clean the soldering tip and wet it with solder. An oxidized
soldering tip can otherwise produce temperature measurement errors. Then set the temperature control
knob to 350°C, wait until the temperature has stabilized and then measure the soldering tip temperature.
Turn the screw labeled CAL in small increments until the measured temperature corresponds to the set
value of 350°C +/-5°C. Give the heating element time to compensate between cooling down and
reheating.
Error
No function after power on
Soldering tip is sometimes not hot
enough.
Solder does not melt, despite
correctly set temperature.
EU Declaration of Conformity according to Low Voltage Directive 2014/35/EU (No. 01-20)
The manufacturer / distributor
Bräunlich GmbH
Am Heideberg 26
06886 Lutherstadt Wittenberg
hereby declares that the following product
Product name: GALLUNOPTIMAL Soldering Iron
Trade name:
GALLUNOPTIMAL SPRINT80
Model name:
GOSPRINT80+
complies with the provisions of the Low Voltage Directive 2014/35/EU - including its amendments in force at the time
of the declaration.
The following harmonized standards have been applied:
"DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonization of the laws of the Member
States relating to electromagnetic compatibility".
The following national or international standards (or parts/clauses thereof) and specifications have been applied:
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A2:2019 + A14:2019
EN 60335-2-45:2002 + A1:2008 + A2:2012
EN 62233:2008
Location:
Lutherstadt Wittenberg
Date:
30.8.2022
_______________________________
(Signature)
Tobias Bräunlich, CEO
Correct disposal of this product
The crossed-out wheeled garbage can indicates that this product must not be disposed of with
other waste in the household waste throughout the EU. To avoid harm to the environment or
damage to health, recycle the product responsibly to promote the sustainable reuse of material
resources. For an environmentally sound disposal of your old device, please use the return and
collection systems. For more information, please contact your city or local authority. Or contact
the dealer from whom you purchased the product.
Tel. +49 (0) 3491/6181-0
www.loet-shop.de
Testing
Is the power cable plugged in
correctly?
Is the soldering tip inserted
correctly?
Measure the temperature at the
soldering tip.
Solution
Disconnect and reconnect the power
cord.
Check soldering tip for correct fit
and insert accordingly.
Calibrate soldering tip temperature
or replace cartridge soldering tip
Bräunlich GmbH
Am Heideberg 26
D-06886 Lutherstadt Wittenberg