Dynex DX-DRTVL103 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dynex DX-DRTVL103. Dynex DX-DRTVL103 16 pages. Grand support de montage mural ultra-mince avec inclinaison de - 5° optionnelle
Également pour Dynex DX-DRTVL103 : Manuel (6 pages), (anglais) Manual Assembly Instructions (16 pages), (français) Instructions De Montage Manual (16 pages)
Imprimer la page
6
Step 1:
Assembly instructions
Adjust the tilt
Note: The tilt on the left TV bracket (02) and right TV bracket (03) must be the same.
Use a Phillips screwdriver to remove the two screws (S) from the outside edges of each TV bracket (02 and 03).
To tilt the TV forward by 5°, push the tilt brackets on the left TV bracket (02) and right TV bracket (03) down.
OR
To keep the TV completely vertical, push tilt brackets on the left TV bracket (02) and right TV bracket (03) up.
Re-insert the two tilt screws (S) into each TV bracket (02 and 03), then tighten the screws.
Caution: Do not over tighten the screws.
Option 1: Mount tilted -5°
&
02
03
&
Option 2: Mount not tilted
&
02
03
&
You'll need:
Phillips screwdriver
Tilt
bracket
S
Tilt bracket
S
Need help? Call 800-305-2204
02
&
03
02
03
&
DX-DRTVL103
S
S