CorAccess Mobile Companion Manuel de démarrage rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} CorAccess Mobile Companion. CorAccess Mobile Companion 9 pages.
Imprimer la page
Mobile Companion Quick Start Guide --- Windows CE 3.0
vi) When you select "Specify an IP address"; you have to ask your network administrator for an
address and type it in the space provided (IP Address, Subnet Mask, and Default Gateway). In
addition to that you have to specify additional "WINS" or "DNS" in "Name Servers", then
click on "OK" at the top of the window for confirmation.
vii) Now, you may need to set up a user name, password and Domain. Click "Identification" in
Network Configuration window, input your "Name", "Password" and "Domain". Windows
CE uses the information to identify your right to access the network. Then click "OK" at the
top of the window for confirmation.
c) Stylus Setup and Calibration
i) Double-click "Stylus"; the Stylus Properties window will appear.
ii) You can test "Double-Tap" function; you have to follow the instructions to double click the
two squares right of the Window. If it is correct, then click on "OK" at the top of the window
for confirmation.
iii) If you want to recalibrate or your device is not responding properly to your taps, select
"Calibration", follow the instruction to recalibrate. When you are done, click on "OK" to
continue.
d) System Properties Set Up
i) Click on "System"; the System Properties window will appear.
ii) Click "General", the System information will be displayed. Then click on "OK" at the top of
the window for confirmation.
iii) Click "Memory", you can adjust the allocation of unused RAM to run programs or for storage
(by moving the arrow to right or left). After changes, click on "OK" at the top of the window
for confirmation.
iv) The System Properties Set Up procedure is completed.
Note: This feature may not be persistent over power cycles.
e) System Software Update
i) Click on "Update"; the Update window will appear.
ii) Provide appropriate information in the blank fields, click "Update" button, and the device will
be updated with specified software from specified server automatically. Follow any displayed
instructions. After finishing with the loading process, click on "OK" at the top of the window
for confirmation.
CAUTION for "Update" Function
To avoid system crashes and irrecoverable states, you must:
! Use AC power instead of Battery power when the device software is being updated.
!
NOT turn the system OFF when the device software is being updated.
NOTE: It is advisable that you restart the device before performing the Update function, or at least close
all opened applications.
Page 5 of 8
Nov, 2001