Dynex DX-WD1201 Manuel d'instructions de montage - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Dynex DX-WD1201. Dynex DX-WD1201 16 pages. Meuble tv expresso pour televiseurs de 32 po
Également pour Dynex DX-WD1201 : Manuel (6 pages), (anglais) Manual Assembly Instructions (15 pages), (Français) Instructions De Motage Manual (15 pages)
Imprimer la page
12
Step 6:
Carefully turn your stand over onto its front edges. Unfold the back (G) and lay it over your stand.
Make equal margins along the side and bottom edges of the back (G). Push on opposite corners of your stand
if needed to make it "square. "
Fasten the back (G) to your stand using the nails (V).
Note: Make sure that you tap nails into the holes that line up over the upright (C) and shelf (F).
Note: Perforations have been provided for access through the back (G). Carefully cut out the holes needed.
Caution: Do not
stand your stand
upright without the
back fastened. Your
stand may collapse.
These holes must line up over the
back edges on the upright (C) and
shelf (F).
You'll need:
Hammer
Need help? Call 800-305-2204
Do not tap
nails in this
edge
V (24)
DX-WD1201