Maico MC 250 Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Maico MC 250. Maico MC 250 19 pages.

FENDERS

The front fender is rubber-mounted

under the seat and on the rear frame member. Both fenders are made from vibration

FRONT WHEEL

The rim is available in either chromed steel or

aluminium

21 ". The tire is 3.00 x 21" - mota cross with a

rim lock to keep the tire from spinning on the

rim. The front hub (drum brake) is made of cast

aluminium

ring. The brake diameter is

1360mm

On the small end of the hub is a reinforcing

made of aluminium

10. REAR WHEEL

This rim is also available in chromed steel. size

1.85 x 18". or aluminium

The tire is either a 4.00 or 4.50 x 18" - mota

cross type with one rim lock to secure the tire

to the rim. The rear hub is steel made with a

cast-in brake drum, 160 mm diameter with a large

recession for heavy duty bearings especially for

mota cross. The brake shoes are forged of mag-

nesium with epoxied brake linings.

The rear brake is operated with the right foot by

a forged aluminium

with a steel brake rod.

alloy. The measurements are 1.60 x

alloy. with a cast-in steel brake drum

18 spokes M 4 x 243 mm

18 spokes M 4 x 230 mm

alloy for strength.

alloy. size 2.15 x 18".

18 spokes M 4 x 143 mm

18 spokes M 4 x 208 mm

alloy foot lever connected

on the lower triple clamp. The rear fender is also rubber-mounted

ring

13. F rant Wheel

14. Rear Wheel

resistant fiberglass.