AGS Merlin 1000S Manuel d'installation et d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AGS Merlin 1000S. AGS Merlin 1000S 16 pages. Gas utility isolation controller
Également pour AGS Merlin 1000S : Manuel d'utilisation et d'installation (10 pages), Manuel d'installation, d'utilisation et d'entretien (10 pages), Manuel d'installation et d'utilisation (12 pages)
Imprimer la page
Installation & Operation Manual
Typical Installation Arrangement
Terminal Connections
1. POWER / LINE IN
110-120V AC Power should be supplied to the [POWER / LINE IN] terminal and fused at 3A.
On connecting the mains supply to the panel the power LED indicator will light up – this is
located on the front cover (American Gas Safety Logo).
2. GAS SOLENOID VALVE OUTPUT
100-120V AC electrical power supplied from the [VALVE OUT] connector using a 3 core cable
can be connected to a gas solenoid valve which can shut the gas supply on alarm status.
Pressure sensors should be screwed to the downstream port of the valve.
Refer to your valve manual for more information and wiring!
1000S IOM Rev: 07
01-20
Merlin 1000S
4