Galvin Engineering Haws 7778B-A Manuel d'installation des produits

Parcourez en ligne ou téléchargez le pdf Manuel d'installation des produits pour {nom_de_la_catégorie} Galvin Engineering Haws 7778B-A. Galvin Engineering Haws 7778B-A 9 pages. Eye/face wash, wall mtd, hand activated, axion msr head & s/steel bowl
Également pour Galvin Engineering Haws 7778B-A : Manuel d'installation des produits (7 pages)

Galvin Engineering Haws 7778B-A Manuel d'installation des produits
®
GalvinSafe
®
Axion
MSR Head, S/S Bowl w/ Body Spray (HAWS)
PRODUCT CODE:
Galvin Engineering: 190.42.11.90
HAWS: 7778B-A
PRE – INSTALLATION: 7778B-A
LOCATION OF UNIT: The Model 7778B-A Eye/Face Wash should be installed in close
proximity to potential accident areas. It should be clearly identified, free from obstructions
and easy to access.
SUPPLY LINE: The minimum recommended line size is 1/2" BSPT with 210 – 600 kPa
flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended.
PLUMBING CONNECTIONS: Inlet supply is female 1/2" BSPT. Waste outlet is male 1-
1/4" BSPT.
PRE – INSTALLATION: 8901B
LOCATION OF UNIT: The Model 190.43.55.32 (8901B) Hose Spray should be installed
in close proximity to potential accident areas. It should be clearly identified, free from
obstructions and easy to access.
SUPPLY LINE: The minimum recommended line size is 1/2" BSPT with 210 – 600 kPa
flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended. A vacuum breaker is required to be used with this item. (Not supplied with
the product or by Galvin Engineering)
PLUMBING CONNECTIONS: Inlet supply is male 1/2" BSPT.
Eye/Face Wash, Wall Mtd, Hand Act,
Version 4.1, 12
HAWS: 8901B
t3
Aug. 021, Page 1 of 9