AGS Merlin 1000SW+ Manuel d'installation et d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AGS Merlin 1000SW+. AGS Merlin 1000SW+ 16 pages. Gas, electric & water isolation controller
Également pour AGS Merlin 1000SW+ : Installation Fonctionnement et entretien (12 pages)
Imprimer la page
Installation & Operation Manual
Auto Shut-Down – Selectable Utility
There are two switches located on the circuit board labelled [ELECTR] and [WATER].
They are factory set to 'Off'.
On installation, they can be switched 'On' - This will instruct the system to also turn off
Electric and/or Water services when performing auto-shut down/ timeout.
Specification
Model:
Visual Indication
Mains Electrical Power Input
Gas Solenoid Valve Output
Electrical Contactor Output
Water Solenoid Valve Output
Current Consumption
Internal Fuse
Operating Temperature
Audible Alarm Buzzer dB
Pressure Sensor Operating Pressure
Internet connection
Housing Material
Flame Rating
Approvals
O/All Dimensions (H x W x D) mm / inch
1000SW+ IOM Rev: 09
01-20
1000SW+
LED
100-120VAC
100-120VAC
100-120V AC
100-120V AC
12W max (50mA) @ 120VAC
3.15A
32 – 104°F 0-95%RH Non-Condensing
65 dB (300mm distance in quiet conditions)
0 -1.45psi
N/A
Polylac PA-765
UL 94
CE, RoHS
7.08 x 10 x 3.03"
Merlin 1000SW+
9