Coralife TurboTwist Series Manuel d'instructions - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Coralife TurboTwist Series. Coralife TurboTwist Series 6 pages. Uv sterilizer
Également pour Coralife TurboTwist Series : Manuel d'instructions (12 pages)

Coralife TurboTwist Series Manuel d'instructions

PARTS DIAGRAM

FLAT O-RING
UVC LAMP
THREADED CAP
O-RING
(HOSE
BARB
OUTLET)
HOSE BARB
ADAPTER
HOSE LOCK NUT
Water pump
not included.
LAMP ON INDICATOR

SPECIFICATIONS

Article
Turbo-Twist 3x
UVC Lamp
9 watt
Rated Voltage
AC120V
Rated Cycle
60Hz
Rated Power
10.2 watt
Irradiation of UVC Radiation*
9,580 µW/cm
Wavelength of Radiation
253.7mm
Life of UVC Lamp
Approx. 8,000 hrs
Aquarium Volume
Up to 125 gals
Flow Rate (gallons per hour)
100-200 gph
Size of O-ring (mm)
12/16, 16/22
Cord Length
Approx. 9 ft
1
PLUG
BALLAST
QUARTZ HOUSING
TANK
BRACKET
O-RING GASKET
TURBO-TWIST
SUCTION
BRACKET
CUP
HOSE LOCK NUT
HOSE BARB
ADAPTER
MAIN
BODY
O-RING
(HOSE
BARB INLET)
Turbo-Twist 6x
Turbo-Twist 12x
18 watt
36 watt
AC120V
AC120V
60Hz
60Hz
19 watt
38 watt
2
11,400 µW/cm
2
11,400 µW/cm
253.7mm
253.7mm
Approx. 8,000 hrs
Approx. 8,000 hrs
Up to 250 gals
Up to 500 gals
200-400 gph
400-1200 gph
16/22, 22/28
16/22, 16/28
Approx. 9 ft
Approx. 9 ft
*(value @ 20mm distance from the UVC lamp)
The Coralife Turbo-Twist Ultraviolet Sterilizers are easy to set up and operate.
Please read all instructions in their entirety before installation.
To accommodate your new sterilizer, you will need a power-head, pump, or canister fi lter
with an appropriate fl ow rate for the size of your UV Sterilizer to ensure adequate ultraviolet
exposure while treating the entire volume of aquarium water with appropriate frequency.
Instructions
Instructions

1. Set up and positioning

Adjusting the hose barb inlet and outlet
The hose barbs can be positioned in four different
locations to facilitate connections to other applications.
➀ Lift the red safelock and unlock
the quartz housing. (Picture 1)
➁ Carefully twist the quartz housing
and the main body opposite of each
other. (Picture 2)
➂ The quartz housing can now be
rotated 360
o
. (Picture 3)
Adjust the orientation of the hose
barb and set the main body into
the quartz housing.
➃ Combine the main body with the
quartz housing and rotate
2
according to the arrowhead
"close". (Picture 4)
➄ Press in the red safelock and the
UV Sterilizer is now ready to install.
(Picture 5)
SAFELOCK
O-RING GASKET
QUARTZ
HOUSING
QUARTZ SLEEVE
SAFELOCK
(PICTURE 1)
QUARTZ HOUSING
(PICTURE 2)
MAIN BODY
QUARTZ HOUSING
MAIN
BODY
(PICTURE 3)
(PICTURE 4)
SAME AS PICTURE
(PICTURE 5)
MAIN BODY
2