Dynisco 1490 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Dynisco 1490. Dynisco 1490 20 pages. Din indicator
Également pour Dynisco 1490 : Manuel du produit (2 pages)

Imprimer la page

From lab to production,

providing a window into the process

2. Select Mode

Select mode is used to access the configuration and operation menu functions. It can be accessed at

any time by holding down

the legend for the current mode.

enter. An unlock code is required to prevent unauthorised entry to Configuration, & Setup modes.

Press

to enter the unlock code, then press

NOTE: Automatic return to Operator Mode after 2 minutes without key activity.

3. Configuration Mode

First select Configuration mode from Select mode (refer to section 2). Press

the parameters.

While this key is pressed, and up to 1 second after, the parameter legend is shown,

followed by the current value.

press

accept the change, otherwise parameter will revert to previous value. To exit from

Configuration mode, hold down

Note: Parameters displayed depend on how instrument has been configured. Refer to user guide

(available from your supplier) for further details. Parameters marked * are repeated in Setup

Mode.

and pressing

The SELCt legend is shown for 1 second, followed by

Press

to choose the required mode, then press

Press

to set the required value. Press

and press

, to return to Select mode.

P/N: n/a

Rev: n/a

www.dynisco.com

-6-

to proceed.

to scroll through

to display YES? ,

ECO: n/a