Coram TUBULAR SHOWER PANELS Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Coram TUBULAR SHOWER PANELS. Coram TUBULAR SHOWER PANELS 9 pages.

Imprimer la page

ø 6

Place the second wall channel in position against the wall.

a: Ensure the wall channel is vertical and mark the four holes onto the wall.

b: Drill the four positions marked using a 6mm drill bit.

c: Apply silicone sealant to the back of the wall channels

d: Insert the wall plugs. Place washers over the 32mm screws and fix the wall

channel to the wall. If necessary, slight adjustment is available in the wall channel.

Push-fit the top caps onto the wall channels.

Slide both seals down into the wall channel and cut

off any excess.

Note the orientation of the soft flippers.

Outside

From outside only, apply silicone sealant along the bottom of the panels as shown.

IMPORTANT

Ensure Glass Guard H2o

label is to the outside of

the enclosure/panel

Satin glass patterns must

be installed to the outside

of the enclosure.

Note:

The Glass Guard coating

is on the opposite side

to the label or satin glass

patterns

Carefully push the panel into the wall channel.

Note: Wetting the edge of the panel with water will

help the panel insert.

CARE AND MAINTENANCE

IMPORTANT: When silicone sealant is used you must not use or work on the enclosure

for 24 hours after installation.

DO NOT use bleach, scouring powders, solvents or other aggressive cleaning agents.

To clean use warm soapy water and a clean cloth and rinse off.

Periodically check all fixings and tighten if necessary.

Packaging: The cardboard and polythene parts of this packaging can be recycled

End of life: This product contains materials such as aluminium and glass which can be recycled

Please contact your local authority to find your nearest recycling centre

THE CORAM GROUP OF COMPANIES

CUSTOMER CARELINE:

Now attach the Vertical

strut to the second panel,

repeating steps:

17 - 21

RECYCLING

A PRODUCT OF

Coram Showers Limited

Stanmore Industrial Estate

Bridgnorth

Shropshire WV15 5HP, UK

www.coram.co.uk

01746 713410

PAGE 9