Coram Showers OPTIMA Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Coram Showers OPTIMA. Coram Showers OPTIMA 16 pages. Extender pack
Également pour Coram Showers OPTIMA : Manuel (2 pages), Manuel (2 pages)

Imprimer la page
Check contents of pack before installation. If anything is
missing, contact our Customer Careline for assistance.
SLIDING DOOR CONTENTS
PN3230
PN3225
32mm
PN60014
13mm
PN3222
10
10mm
PN4748
14
PN50103
PN4745
PN60418
1
a
=
100mm
max
a: Drill holes in both wall channels at points shown using a 4.5mm drill bit, where shown.
b: Ensure the shower tray is level in all directions. IMPORTANT: Clean the tray and seal the gap between the tray surface and tiles.
It is important that the tray is sealed right up to the tray edge so that the bottom of the wall channel is sealed. Failure to do this will
cause water to leak under the wall channel and between the tray and tiles, resulting in damp patches on the wall and under the tray.
2
PN80519
8
1500 =
PN40272
8
1700 =
PN40273
2
PN40260
PN80564
PN40259
8
PN60250
PN50382
8
1
PN60058
=
=
ø 4.5
mm
2
4
2
1
2
4
PN10801
4
1
b
100mm
max
The enclosure can be assembled with the side
panel on either the right or left (see step 4).
Note: The following instructions show the
enclosure with the side panel on the left.
1500 RAIL - PN80531
1700 RAIL - PN80532
SIDE PANEL CONTENTS
PN3222
3
10mm
PN10801
1500 RAIL - PN80531
1700 RAIL - PN80532
PN4748
3
9