Coram Showers OPTIMA Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Coram Showers OPTIMA. Coram Showers OPTIMA 2 pages. Extender pack
Également pour Coram Showers OPTIMA : Manuel (2 pages), Manuel (16 pages)

Imprimer la page

Check contents of pack before installation. If anything is

missing, contact our Customer Careline for assistance.

CUSTOMER CARELINE: 01746 713410

PN60046

50mm

PN50045

This extender pack can be used to extend Optima Shower enclosures.

Each extender channel will add 20mm to the width of the door or side panel.

PN10899

Following the instructions supplied with the door, drill each wall channel in 4 positions.

Place the wall channel onto the extender channel (on the side with slightly raised edges). Mark the hole positions and drill the

extender channel.

IMPORTANT: Ensure the wall channel you use as a template is the same one that will fix to that extender channel in step 2.

PN10899

ø 4.5

Install the door following the instructions supplied, adding an extender channel where required. As with the wall channels apply

sealant to the back of the extender channels before fixing to the wall.

Where an extender is used, you MUST replace the 32mm wall fixing screws (supplied with the door screw pack) with the longer

50mm screws and screw caps (supplied with this pack).

PN50045

Push fit the top caps.

+20mm

50mm

PN50045