Dynojet power commander III Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dynojet power commander III. Dynojet power commander III 3 pages. 2004 kawasaki zx12r
Également pour Dynojet power commander III : Instructions d'installation (5 pages), Instructions d'installation (5 pages), Manuel d'installation (3 pages), Instructions d'installation (4 pages), Instructions d'installation (4 pages), Manuel d'instructions d'installation (3 pages), Instructions d'installation (3 pages), Instructions d'installation (3 pages), Instructions d'installation (3 pages)

Imprimer la page
Dynojet power commander III Manuel d'installation
Stock connectors
i105-411
www.powercommander.com
Unplug this connector
PCIII connectors
Ground wire from PCIII
1
Remove the main seat and rear
solo seat cover.
2
Prop the front of the fuel tank
up.
3
Locate the connector in Fig. A.
Unplug this connector. This
connector is located on the left
hand side of the bike.
4
Plug the grey connectors from
the PCIII inline of the stock
connectors (Fig. B)
5
Attach the ground wire from the
PCIII to the negative side of the
battery (Fig. C).
2000-2001 Honda RC51 - PCIII USB - 2