Dynojet Power Vision Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dynojet Power Vision. Dynojet Power Vision 17 pages. For 2019-2022 can-am ryker 600/900
Également pour Dynojet Power Vision : Manuel d'installation (6 pages), Manuel d'installation (8 pages), Manuel d'installation (7 pages), Manuel (7 pages), Manuel d'installation (7 pages), Manuel d'installation (7 pages), Manuel d'installation (7 pages)

DIAGNOSTIC CONNECTOR LOCATIONS

2004-2015 Dyna Models

Diagnostic connector is located behind the

Left hand side cover. Connector is Light Grey

in color with black rubber plug installed.

Note: 2001-2011 models are J1850 using the PV-1.

Note: 2012-13 models are CAN, using the PV-2.

2007-2015 Sportster Models

(including XR Models)

Diagnostic connector is located behind the

Left hand side cover. Connector is Light Grey

in color with black rubber plug installed.

2002-2007 Touring Models

Diagnostic connector is located behind the

right hand side cover. Connector is Light

Grey in color with black rubber plug installed.

Note: Requires removing the Right side saddle bag.

2008-2015 Touring Models

Diagnostic connector is located behind the

left hand side cover. Connector is Light Grey

in color with a black rubber plug installed.

Note: Requires removing the Left side saddle bag.

2001-2015 Softail Models

Diagnostic connector is located under

the seat, attached to the frame by the rear

fender. Connector is Light Grey in color, with

black rubber plug installed.

Note: Requires removing the seat.

Note: 2001-2011 models are J1850 using the PV-1.

Note: 2011-2013 CVO models are CAN using the PV-2.

Note: 2012-2013 models are CAN using the PV-2.

2002-2015 V-Rod Models-

Shown on Page 8

Diagnostic connector is located behind the

Right Front frame cover. Connector is Light

Grey in color with black rubber plug installed.

Note: Tools required to access.

Power Vision Quick Start Guide - 9