Dynojet FC16052 Instructions d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Dynojet FC16052. Dynojet FC16052 5 pages. Power commander fc, fuel injection module

Imprimer la page

FIG.G

Unplug

FIG.H

FC16052

www.powercommander.com

12 From the left hand side of the bike, locate and unplug the stock connector for

the bike's O2 sensor (Fig. J).

This is a BLACK 4-pin connector. It is rear of the engine. You can trace the

cable from the stock O2 sensor in the exhaust to it.

13 Plug the supplied O2 Optimizer into the bike's wiring harness in-place of the

stock O2 sensor (Fig. K).

The stock O2 sensor will no longer be used. It can be removed from the

exhaust if desired and if you have a way to plug the hole in the exhaust.

14 Lower and secure the fuel tank. Reinstall the bodywork and seats.

2014 Honda CB650F/CBR650F - PCFC - 5