Dynojet PCIII USB Instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Dynojet PCIII USB. Dynojet PCIII USB 3 pages. Power commander for 2005 triumph daytona 650
Imprimer la page
Unplug harness
i511-411
www.powercommander.com
O2 controller
7
Install the Power Commander in
the tail section.
use the supplied alcohol swab to
clean the inner rear fender
before attaching the Power
Commander.
velcro to secure the unit to the
inner rear fender (Fig. D).
8
Unplug the stock O2 sensor
from the wiring harness.
connector is located underneath
the fuel tank next to the regula-
tor/rectifier (Fig. E).
9
Plug the Dynojet O2 controller
into the stock wiring harness.
10
Install the O2 controller to the
right side of the inner rear fend-
er (Fig. F) using the supplied
velcro.
11
Reinstall fuel tank and seats.
2005 Triumph Daytona 650 - PCIII USB - 3
Make sure to
Use the supplied
This