AireGard FS-150 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AireGard FS-150. AireGard FS-150 12 pages. Fresh air supply

Imprimer la page

1. Installation Guides

PACKING LIST

NOTE :

1. Kindly check through the entire contents of the packaging box

and make sure that you have all the spare parts and accessories

needed. Contact the dealer or manufacturer should you face

problems with missing components.

Use only the remote controls and matching spare parts

provided by this package.

IMPORTANT NOTICE

1. Do not install the main unit and the air inlet in areas with close proximity to heavy machineries, chemical

plants or research facilities, and avoid any possible exposure to materials with high acidic or alkaline contents

in nature, or organic dissolvent, paints or poisonous gases with corrosive elements as it could lead to gas

poisoning, damage to the main unit as well as possible fire hazards.

2. Do not install the unit in the areas where it is exposed to extensive heat or has direct exposure to possible

source of fire. Avoid installing the unit in high temperature environment exceeding 40 as it could lead to

deformation of the filter and caused serious damage to the unit.

3. Avoid using the unit in the areas where is there is a high density of oily fumes as the stains on the filter are

not removable and may caused foul smells and possible fire hazards.

4. Avoid using the unit in areas where there is a high density of insects in the are as the unit may suck in insects

through the air inlet which is exposed to the outside of the premise into the indoor environment. Consider

installing a rain proof insect repelling net on the air inlet to avoid the intrusion of insects into the unit which

could cause interference to the unit's operation.

5. Ensure that the unit comes complete with an inspection to facilitate any future maintenance needs.

6. The unit is integrated with heat sensitive insulator, and helps to control the different operating modes of the

unit (High / Mid / Low / Stop) with the help of the integrated temperature sensor to eliminate the likelihood

of discomfort caused by the variances between indoor and outdoor temperature. Hence, it is absolutely

normal that the operating modes of the unit may alter from time to time due to the change in temperature.

Under the normal circumstances of operating room temperature (-10 ~40 ), the performance of the unit

are as follow:

Zone 1

Zone 2

Zone 3

Temperature Drops

EXAMPLE #1:

User sets mode to "High" or "Mid", but when room temperature drops from 1

cally adjust the speed to "Low", surpassing from Zone 1 status to Zone 2 status. If temperature continues to

drop further to -10 , the unit will enter a hiatus for 20 minutes and enter into Zone 3 status. As temperature

gradually rises above -10

automatically restarts from "Low" speed again, elevating from Zone 3 status back to Zone 2. And when the

temperatures has risen to 0

to "High" or "Mid", further pushing the level from Zone 2 back to Zone 1.

EXAMPLE #2:

User sets mode to "High" or "Mid", but when room temperature drops from 1 to -2

unit will remain active in the "High" or "Mid" speed. If temperature continues to drop further to -3 , the unit

will remain operating in the preset speed mode and stay in the Zone 1 status.

NOTE : When room temperature has dropped to more than -10 , the unit will stop operating for 20 minutes

and will only resume operation when room temperature rises to equal or more than -10 . If the room tem-

perature has already risen to equal or more than -10 but the unit has still not resume operation, please turn

off the power supply and contact the agent or dealer for service or inspection maintenance.

ZONE

Zone 1

T > -3

T > 0 (Temperature Rises)

Zone 2

-10

Zone 3

-10

Temperature Rises

, and after the unit has stopped operating for 20 minutes or more, the unit will

and more, the the speed of the unit will automatically be adjusted from "Low"

NO. ICON

TEMPERATURE

(Temperature Drops)

T -3

(Temperature Drops)

(Temperature Rises)

T < -10

NAME

USER MANUAL

PHILLIP SCREWS (M4 x 16)

86 BOX CONTROL KIT

86 BOX WIRES

OPERATION MODES

HIGH

USER

MID

PRESET

LOW

DEFAULT

STOP RUNNING

FOR 20 MINUTES

to -3 , the unit will automati-

and back to 2 , the

QUANTITY

page 2