AGS Merlin 1000S Manuel d'installation, d'utilisation et d'entretien - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} AGS Merlin 1000S. AGS Merlin 1000S 10 pages. Gas utility isolation controller
Également pour AGS Merlin 1000S : Manuel d'utilisation et d'installation (10 pages), Manuel d'installation et d'utilisation (12 pages), Manuel d'installation et d'utilisation (16 pages)

Merlin 1000S

Gas Utility Controller

1) [POWER] Mains Input 110-120VAC Single Phase.

2) [GAS VALVE] Gas Solenoid Valve Power Output, 110-120VAC, Max 3A.

3) [BMS OUT] Building Management System output contacts.

Normally Closed, Common and Normally Open. Max.1A @ 110-120VAC.

4) [PRESSURE SENSOR] Gas pressure transducer, power supply and returned signal (supplied).

5) [EM REMOTE] Remote EM Stop buttons and Fire Alarm input wired in series VOLT FREE

(Purchased separately).

6) [GAS DETECTOR] Methane, CO or LPG Detector, power supply and VOLT FREE

(Purchased separately).

7) [FS1/2/3/4] Fan Switch output (purchased separately).

For wiring instruction see Fan Switch user manual.

8) [CO2 MONITOR] CO2 Monitor (purchased separately). VOLT FREE

9) [12VDC] Permanent 12VDC output when there is power at the panel. 50mA max

Panel Net Weight: 1161g

Panel Dimensions: (W) 10" x (L) 7" x (D) 2.4"

MAINS AND LOW WIRING SHOULD NOT RUN IN THE SAME CONDUIT AS PER THE LOW VOLTAGE DIRECTIVE

Rev: 05 Date: 29-10-18

1000S WIRING

PLEASE NOTE:

User & Installation Manual