Gama Sonic DPEZ5F0 Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Gama Sonic DPEZ5F0. Gama Sonic DPEZ5F0 4 pages. 5' decorative post with ez kit

Imprimer la page

3. Assembly Instructions

1. Remove the base plate (H) from the base pole (A) by

removing the screw caps, nuts, and washers from each of

the three screw studs.

Installing in concrete

- Using the base plate (H) as a template and mark where

the three holes will need to be drilled.

- Drill three holes in the concrete no larger than the

provided anchors.

- Insert the three anchors into the holes and secure

the base pole to the concrete by tightening the three

anchors.

- Continue to Step 2

Installing using the EZ Anchor

- Place the turning (I) bar through the hole at the top

of the auger (G) and begin twisting the auger (G) into

the ground clockwise. Use downward pressure while

turning.

- Occasionally check the level tool on the auger (G) to

ensure the auger is vertical.

- Stop turning once the ring on the auger (G) is flush

with the ground.

- Slide the base plate (H) over the auger and secure it

with the large nut and bolt.

- Re-install the base pole (A) to the base plate (H) and

secure with the washer, nut, and screw caps removed

in step 1.

2. Attach the middle pole (B) to the base pole (A) and secure

with the three provided screws.

3. Attach the top pole (C) to the middle pole (B) by screwing

them together.

4. Attach the spacer pole (D) to the top pole (C) by screwing

them together.

5. Attach the fitter adapter (E) to the spacer pole (D) by

screwing them together.

6. Mount your 3" lamp to the fitter adapter (E) and secure

using the setscrews on the lamp.

page 3