HIKOB GATEWAY H-GW103D-G Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} HIKOB GATEWAY H-GW103D-G. HIKOB GATEWAY H-GW103D-G 12 pages.
Également pour HIKOB GATEWAY H-GW103D-G : Manuel d'installation (11 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

HIKOB GATEWAY

Document version 2017V2-EN

an embedded REST server. Information exposed by the HIKOB GATEWAY can therefore be

integrated in a 3rd party information system. HIKOB GATEWAY provides as well services to

configure HIKOB sensors, and to perform basic maintenance such as firmware update.

The HIKOB GATEWAY is not energy-autonomous: it is powered by the PoE technology

(Power over Ethernet) through an Ethernet cable.

Models A and B of the HIKOB GATEWAY can be installed and used outdoor. The HIKOB

GATEWAY casing is water resistant with an IP65 protection. The first number 6 identifies

protection against complete ingress of dust, the second number 5, identifies protection against

the effects of spraying water. Should you decide to perform cleaning tasks on the HIKOB

GATEWAY, don't perform high pressure cleaning, prefer wiping with a dry cloth, or with a

neutral agent.

Radio and GPS antennas are integrated into the envelope of the HIKOB GATEWAY, which

are delivered all assembled and ready to be fastened on a pole or a wall, please refer to the

Installation section for details.

3. Data sheet

Power supply Power over Ethernet with RJ45 connector following the 802.3at, 802.3af norm.

(which corresponds for this product to 36 - 57 VDC, 0.1Amax).

Packaging

IP65 according to EN 60529

Dimensions

22 x 12 x 3.8 cm

Weight

360g

Temperature

Operating and Storage -20°C +60°C

Radio

Frequency Band

Protocol

IEEE 802.15.4e

Antenna gain +3dBi

Input level sensitivity -101dBm

Output power

Range

2.4GHz ISM

+4dBm

30m to a buried sensor

2017 · Page 8/12