Gama Sonic GS-106B-PLSG Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gama Sonic GS-106B-PLSG. Gama Sonic GS-106B-PLSG 4 pages.

Imprimer la page
1
Planter Installation Instructions - without the EZ Anchor
1. Place part (G) inside the planter, part (H)
2. Insert part (F) through the center circle of part (G) and screw into
the bottom of the planter.
* Please note, part (F) has its bottom part painted.
3. Screw part (D
) onto part (F) then screw part (E
1
4. Screw part (D
) onto part (E
2
5. Screw part (D
) onto part (E
3
6. Screw part (D
) onto part (E
4
(D
).
4
7. Screw parts (C) x 2 into part (B).
3
2
+
EZ Anchor Installation Instructions
1. Insert the Turning bar in the hole through the Auger stake.
2. Place Auger in desired location and apply downward pressure
while turning the Turning bar clock wise.
3. Occasionally check the Auger Level Tool to ensure your digging
is straight.
4. Stop turning once the ground stop ring has reached ground level.
5. Remove the Turning Bar.
Auger Level Tool
-
2
Only
Place the Planter on top of the anchor.
2
+
3
Lamppost assembly:
1. Screw part (D
) onto part (F) then screw part (E
1
2. Screw part (D
) onto part (E
2
3. Screw part (D
) onto part (E
3
4. Screw part (D
) onto part (E
4
5. Screw parts (C x 2) into base of part (B).
Placing the Lamp on top of the Anchor:
1. Unscrew the two screws from part (F).
2. Place the assembled lamp on top of the Auger stake
3. Secure part (F) to part (G) using the two screws.
) into part (D
1
) then screw part (E
) into part (D
1
2
) then screw part (E
) into part (D
2
3
) then screw parts (A+B) into part
3
) into part (D
1
) then screw part (E
) into part (D
1
2
) then screw part (E
) into part (D
2
3
) then screw parts (A+B) into part (D
3
).
1
).
2
).
3
).
1
).
2
).
3
).
4
3