Gama Sonic GS-118P Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gama Sonic GS-118P. Gama Sonic GS-118P 4 pages. Inversee solar light

Imprimer la page

Pier Mount:

Note: There are specific types of screws for specific surfaces. If you're unsure of the appropriate type of

screw to use on your desired surface, please consult a professional.

1. Attach the fixture (A) to the pier mount (C) with the screw

(Fig.2).

2. Use a drill to make two holes in the desired surface. (use the

pier mount as a template for drilling locations)

3. Place the anchors into the holes and place the lamp in line with

the holes.

4. Secure it with the provided screws.

Wall Mount:

Note: Installing the light on a wall may limit the solar panel for sun exposure. Make sure the lamp

is mounted so direct sun exposure is available.

1. Attach the fixture (A) to the

(Fig.3).

NOTE: The wall mount has two different size holes on the arm,

make sure the fixture is attached to the side with the smaller hole.

The screw will go through the larger hole on the bottom, so it

will be hidden after installation.

2. Use a drill to make two holes in the wall where the lamp will be

mounted. (use the wall mount as a template for drilling locations)

3. Place the anchors into the holes and place the lamp in line with the

holes.

4. Secure using the provided screws.

Operation Instructions

Turn the switch on the lamp head to HIGH or LOW position.

LOW lasts longer using dimmer light, HIGH mode provides brighter light output.

NOTE: The performance of the solar lamp will vary with the time of year. It will deliver longer

duration when it has had a full day in the sun rather than a day in overcast weather.

with the

wall bracket (D)

Fig.2

screw

Fig.3