Gama Sonic GS-97B-S Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Gama Sonic GS-97B-S. Gama Sonic GS-97B-S 4 pages. Imperial solar lamp post with gs solar led light bulb
Imprimer la page
Tools that are needed but not supplied with the high post lamps are: a screw driver,
a wrench and an electrical drill that will be used to anchor the lamp base to the
ground.
NOTE: The following steps are for reference only. Consult your local hardware store
for the best installation method for your particular surface.
Assembly Instructions
1. Mark three holes using the template and drill the holes using a 0.5-inch
drill bit, into a solid surface no smaller than the fastening screws. The
holes shall be lined up with the holes of the lamp base
2. Put the fastening screws (included) into the drilled holes with their
threaded ends facing up (Fig 3).
3. Place lamp base onto fastening screws and secure base with the nuts
using a wrench (Fig 4).
4. Make sure the lamp base (A) is stable before proceeding in installation.
Fig. 3
5. Place part (B) over part (A) and using a wrench tighten the three
screws that are provided make sure that the rubber washers go
between part (A) and part (B) (Fig 5).
6. Place part (C) over part (B) and tighten with a phillips head screwdriver
the four screws that are provided (Fig 6).
7. Install the lamp onto your post, using the screws provided.
B
A
Fig 5
C
B
Fig 6
Fig. 4
3