Corbin Russwin ASSA ABLOY Access M801, ASSA ABLOY Access M802 Instruction de programmation - Page 10

Parcourez en ligne ou téléchargez le pdf Instruction de programmation pour {nom_de_la_catégorie} Corbin Russwin ASSA ABLOY Access M801, ASSA ABLOY Access M802. Corbin Russwin ASSA ABLOY Access M801, ASSA ABLOY Access M802 16 pages.

Imprimer la page
Access 800
Series
™
Locks
Keypad Programming Instructions
M801, M803, M804, M806 Programming
5
To Activate The RF FOB Function
Note: Press and hold for 3 seconds the button on the RF FOB. If the controller
beeps and the LEDs flash, the RF FOB function is enabled and this procedure
does not have to be completed. With the RF FOB function enabled the battery
life of the unit will be reduced.
Press the white reset button located in
the battery compartment and any front
keypad key at the same time and hold
for 1 second, then release buttons.
Enter code 1030#
1#
1# (to Enable) or 0# (to Disable)
*
*
*
Enter a Card, Tag, Fob and RF FOB User
99# Master Code or Supervisor Code*
50# (See Table Below)# (User Location 03-2000)#
*
*
Present Card, Tag, FOB or RF FOB
*
*
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018-2019 Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
BEEP / Yellow LED blinks
Yellow LED blinks slowly
Yellow LED goes out
10
(617417440) FM359 7/19