aireRyder F0042 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} aireRyder F0042. aireRyder F0042 9 pages.

Imprimer la page

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE

SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN

DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 15.4 lbs (7kgs). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failing to do so can result in serious injury.

Installation Steps :

Fig.1

Turn OFF the electric circuit at the

main fuse or circuit breaker box.

Fig.3

Lock Pin

Hanger Pin

Remove the Lock Pin and take off

the Hanger Pin.

Fig.6

Collar Screws

Insert and tighten the two Collar

Screws. Slide Lock Pin into Hanger

Pin until it is locked into position.

Wood Member

Ceiling Joist

(2" x 4" Approx.)

Ceiling

Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure

the outlet box is securely installed so that it will be able to support at least the

fan weight.) Attach the safety cable hook to the ceiling, and make sure the safety

cable hook is covered by the fan canopy.

WARNING: Mount only to an outlet box marked "ACCEPTABLE FOR FAN

SUPPORT"!

Fig.4

Motor Wires

Collar

Thread the Motor Wires through the

Downrod Stand Cover,decorative cap,

Canopy and Downrod.

Fig.7

Lock Pin

PAGE: 5 / 9

Ceiling

Junction Box

Hanger Bracket

Fig.5.

Fig.2.

Fig.5

Canopy

Downrod

Decorative Cap

Downrod Stand

Cover

Hanger Pin

Loosen the collar screws in part way.

Insert the Downrod into the Collar.

Slide Hanger Pin through holes of

Collar and Downrod.

Hanger Bracket

Hang the fan on Hanger Bracket, and

make sure the slot of hanger ball is

snapped into the chip of Hanger

Slot

Bracket exactly.

Note: For slope ceiling installation,

Chip

make sure the slot of hanger ball and

the chip of hanger bracket face down.

Wood Member

Ceiling Joist

(2" x 4" Approx.)

Junction Box

Hanger Bracket

Safety Cable Hook

Canopy

Downrod

Decorative Cap

Collar

Downrod Stand

Cover

160310