Cordex TOUGHPIX DIGITHERM Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cordex TOUGHPIX DIGITHERM. Cordex TOUGHPIX DIGITHERM 9 pages. Digital imaging camera
Également pour Cordex TOUGHPIX DIGITHERM : Manuel de l'utilisateur (9 pages), Manuel de l'utilisateur (11 pages)

Imprimer la page

1. Taking Pictures

GETTING STARTED

Turning the Power On/Off

Use the power button on the top of the

camera to turn the camera on and off.

The on button is identified on the top

of the camera with the on/off symbol

located next to the shoot button.

Motorised Optical Focus

Your TOUGHPIX DIGITHERM digital

imaging camera is equipped with an

automatic focus capability. Failure to

properly use this feature will result in

blurred images.

To focus an image, point the camera at

the target of interest and the camera

will automatically focus. Once the

camera is focused and the image is

clear, press the shoot button and hold

whilst the camera takes the shot.

Camera Interface Menus

MENU SELECTION

All camera settings and features are

navigated and selected using the

joystick:

Short press enters the camera menu 

Long press enters the analysis menu

CAMERA MENU

RUGGED

AUTHORITY

TAKING PICTURES MENU

The camera menu has the following

icons:

Visible Imaging

IR Imaging

Image Preview

WIFI

Time and Date

Firmware

ANALYSIS MENU

The analysis menu has the following

icons: 

SPOT Configuration

GLOBAL IR parameter

TOUGHPIX DIGITHERM DIGITAL IMAGING CAMERA - user manual

TAKING PICTURES

CAMERA MENU Icon Details

VISIBLE Imaging

Controls the VISIBLE imaging and capture modes

•

LED: flash operation options

DISABLED: LED flash turned OFF.

ENABLED: LED flash turned ON.

AUTO: LED flash enabled dependent on ambient light.

FLASH CHARGE STATUS: the top right of the display shows:

GREEN indicates fully charged.

RED indicates charging in progress.

•

TIME LAPSE: Sets time period for delay from shoot-button activation.

TIME LAPSE PERIOD: single, 30 sec, 1 min, 2 min, 5 min.

ACTIVATION: Started and stopped by the shoot-button.

INDICATOR TOP LEFT: When stopped shows current setting (in seconds).

When running shows the time to next image.

•

TL THRESHOLD: Sets the temperature threshold for the time lapse to start.

TEMPERATURE: Sets the threshold temperature (-10˚C disables).

ACTIVATION: Started and stopped by the shoot-button.

IR Imaging

Controls the IR imaging and display modes

•

IMAGE TYPE: sets the IR display modes

HIGHLIGHT: Overlays highest temperatures only for hot stop locating.

ATB: Overlays Adaptive Thermal Blending areas determined by ATB high and ATB

low settings.

THERMAL ONLY: IR image only is displayed.

VISIBLE ONLY: VISIBLE image only is displayed.

•

COLOURISATION: configures the IR image colour palette (as displayed on the colour

bar for reference). Industry Standard colour palettes are available: Rainbow, Amber,

Sepia, Grey positive, Grey negative, Iron, Hot metal.

•

ATB HIGH: Selects the temperature threshold above which the ATB overlay is active.

ATB HIGH ACTIVATE: Enable or Disable.

TEMPERATURE: selects the temperature threshold.