Gamber Johnson 7160-1295 Instructions d'installation

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Gamber Johnson 7160-1295. Gamber Johnson 7160-1295 2 pages. Peterbilt 579 dash mount

Imprimer la page
INSTALLATION INSTRUCTIONS
Product
7160-1295
PETERBILT 579 DASH MOUNT
This instruction sheet is for the Gamber-Johnson Peterbilt 579 dash mount. For
other products sold by Gamber-Johnson please reference their specific instruction
sheets.
The Peterbilt 579 dash mount is designed to mount in the opening for the yellow
parking brake and red trailer air supply pull knobs. You will need a Zirkona for Big
Rigs mount to complete the solution.
Attaching the mount:
1. Remove the yellow and red
pull knobs for the parking
brake and trailer air supply by
unscrewing them counter
clockwise.
2. Remove the center dash
panel by pulling it straight
outward from the dash. It is
held in place with spring clips.
3. Remove the (4) phillips
head machine screws that
hold the parking brake and air
supply controler to the back
side of the dash panel.
4. Place the dash panel
bracket over the holes and
reattach the (4) phillips head
machine screws removed in
step 3.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2018 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev.A
center dash
panel
brake and air
supply pull knobs
(4) phillips head
machine screws
dash panel
braket
Form
INST-867
Printing Spec:
PS-001