dyras PHW-3020W Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} dyras PHW-3020W. dyras PHW-3020W 14 pages. Wallmounted heater

Imprimer la page

1. Put the plug in the wall socket , and switch "on" the main switcher.

The LED screen is working.

2. Press the Start/Stop button at the edge of the appliance to start the heater.

Any other functions available by remote control.

3. After you stop the appliance – it would cool down itself for 30sec by ventilator.

：Quick heating switch "

Set temperature : 18-45 °C ( on fig. 25)

：Weekly timer

temperatures in every 5 minutest. If the current measured temperature is at least

8 °C lower than the original measurement, the unit turn off.

Cancel: You can cancel the weekly program any time with pressing

USING THE APPLIANCE

"1000W, "

on/off button ,after turn off , the appliance cooldown itself

for 30sec by ventilator

heating function select : Quick heat , or Low heat

timer (1-8 hours) , when weekly timer is working , can not

use this function

set temperature (use +,- to set temperature 18-45 °C )

open window detection (only while heating)

When function is "on" it compares the actual measured

"2000W