Mainstreet Equipment 829BMR23F Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Mainstreet Equipment 829BMR23F. Mainstreet Equipment 829BMR23F 7 pages. Reach-in refrigerator
Imprimer la page
CABINET LOCATION GUIDES
•
Install the unit on a strong and leveled surface .
•
If the surface is uneven, the unit may be noisy .
•
The unit may malfunction if the surface is uneven .
•
Install the unit in an indoor, well-ventilated area away from doors, air ducts, and fans .
•
For best performance, always maintain 6" of clearance on the back of the unit .
•
Do not use outdoors . For indoor use only .
•
Avoid direct sunlight .
•
Avoid installation in high humidity and/or dusty area .
•
Humidity above 55% can cause the unit to rust, collect condensation,
and may decrease efficiency .
•
Dust collected on the condenser coil may cause the unit to malfunction .
•
Malfunctions due to temperatures above 75 degrees Fahrenheit, humidity above 55%,
or improperly maintained condenser coil will void the warranty .
•
Select a location away from heat and moisture-generating equipment .
•
Do not install the unit inside a closet or alcove .
•
Ambient temperatures above 75 degrees Fahrenheit may cause the compressor to malfunction .
ELECTRICAL
•
Please ensure that the required voltage is being supplied at all times .
•
The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate
over-current protection . Please refer to the electrical requirements on the unit's nameplate .
•
The unit should have its own dedicated outlet .
•
Do not use extension cords .
•
Ensure the unit is not resting on or against the electrical cord .
•
If the unit is not in use for a long period of time, please unplug the unit from the outlet .
•
To avoid shock and fire hazards, do not plug in or unplug the unit with wet hands .
•
After unplugging the unit, wait at least 10 minutes before plugging it back in . Failure to do so could
cause damage to the compressor .
ADJUSTING THE TEMPERATURE
Your new refrigerator or freezer is already factory-set to run at optimum temperatures for food safety
and should require no adjustments.
Refrigerators are set to cycle between a minimum temperatures of 33 degrees Fahrenheit and a maximum
temperatures of 40 degrees Fahrenheit .
Freezers are set to cycle between a minimum temperature of -5 degrees Fahrenheit and a maximum
temperature of 2 degrees Fahrenheit .
4
User Manual
Mainstreet Equipment