Adeunis RF ARF26 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Adeunis RF ARF26. Adeunis RF ARF26 13 pages.

N.B.:

- The content of CTRL1 is identical whatever the channel.

- In "DATACLK" mode, the contents of the registers F2 and CTRL3 are the same as in

paragraph 5.4.

- Consult us for other transmission rates.

• Standby mode

To switch to Standby mode, the registers CTRL3 then CTRL1 have to be programmed:

CTRL3 (hex)

CTRL1 (hex)

7 bits

6 bits

45 (*)

(*): When switching to Standby mode from transmission mode, the register CTRL3 is already

at 45 (hex).

To return to the previous mode, CTRL1 and possibly CTRL3 have to be reprogrammed:

Previous mode

CTRL3 (hex)

Transmission

Receipt

Reset of all the registers is performed by programming the RESET register:

RESET (hex)

Content:

After a reset, the radio module is in standby mode and all the registers have to be

reprogrammed as described above to switch to transmission or receipt mode.

05-11-V3-psn

CTRL1 (hex)

7 bits

6 bits