AGT INDUSTRIAL AGT-WB24 Manuel du produit - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18 pages.

Imprimer la page
1
In case of ALU-S mode unbalanced weight is come out，press
2
Input quantity of spokes by
3
Hold one of the spokes on the rim at 12 O'clock
Slowly turn the tire counterclockwise until the outer side of unbalanced
SP1 indicator lights are all on ( the unbalanced position is determined
4
according to SLC setting before operation)
Slowly turn the tire counterclockwise until the outer side of unbalanced
5
SP2 indicator lights are all on ( the unbalanced position is determined
according to SLC setting before operation)
Put down the hood ，press
6
FIVE. calibration
5.weight calibration
Note: the self-calibration procedure should be run during initial installation, using or tested unbalanced weight is
★
suspected to be inaccurate, to ensure the accuracy of the balancing machine
lead used for self- calibration should be accurate, otherwise it is not correct about final result and directly
affects the balance precision
5 ．1
Power on and turn on the machine's power switch
5 ．2
Install a medium size (13 "-18") tire which can realize balance lead to be clipped on both inner and outer side of rim,
input rim data
1
Press and hold
Put down the hood，press
2
Open the hood, rotate the rim to see outer indicator lights are all on, add
100 grams of balance lead at 12 o 'clock and lower the
3
press
Open the hood, rotate the rim to see inner indicator lights are all on, add
100 grams of balance lead at 12 o 'clock and lower the
4
press
，then press
key to rotate the main shaft，until it
stops
key，at the meanwhile press
key to rotate the main shaft ，wait until it
stops
key to rotate main shaft, wait until it stops
key to rotate the main shaft, wait until it stops.
Self-calibration is successful！
，then press
The operation is successful!
display
key
display
display
cover，
display
cover，
display＞
display＞
display＞
display＞
display＞
Note that the 1 0 0 g balance
＞
＞
＞
＞
14