HIKOKI WW8A Manuel d'instructions de manutention - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de manutention pour {nom_de_la_catégorie} HIKOKI WW8A. HIKOKI WW8A 12 pages.

SAFETY TIPS FOR SPECIFIC AIR TOOLS

IMPACT/RATCHET WRENCHES

General safety tips apply.

Rotating drive sockets and drive extensions can easily

E H

the drive, socket or drive extension.

In cases where the means to absorb the reaction torque are requested, it is recommended to use a suspension arm

In any case, it is recommen ded to use a means to absorb the reaction torque above 4 Nm for straight tools , above 10

Nm for pistol-grip tools and 60 Nm for angle nutrunners. Fingers can be crushed in open -ended crow-foot nutrunners.

Do not use in confined spaces and beware of crushing hands between tool and workpiece, especially when unscrewing.

General safety tips apply.

R M

Do not touch sockets or accessories during impacting, as this increases the risk of cuts, burns or vibration injuries.

Use only impact-wrench-rated sockets in good condition, as poor condition or hand sockets and accessories used

A H

with impact wrenches can shatter and become a projectile.

General safety tips apply.

Keep the hands away from the nutrunner sockets. Do not use worn or ill -fitting sockets or extensio ns, as this is likely to

cause a substantial increase in vibration.

in a stand, tensioner or

Do not use qu ick - disconnect couplings at tool inlet. Use hardened steel (or material with comparable shock resistance)

threaded hose fittings.

Sleeve fittings should be used where practicable. Support the weight of the tool

balancer, if possible.

entangle rubber- coated or metal-reinforced gloves. Never hold

recommended for straight case tools and pistol -grip tools.