HIKOKI UC 36YRSL Manuel d'instructions de manutention - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de manutention pour {nom_de_la_catégorie} HIKOKI UC 36YRSL. HIKOKI UC 36YRSL 20 pages.

14. Always charge the battery before use.
15. Never use a battery other than that specifi ed. Do not connect a usual dry cell, a
battery other than that specifi ed or a car battery to the power tool.
16. Do not use a transformer containing a booster.
17. Do not charge the battery from an engine electric generator or DC power supply.
18. Always charge indoors. Because the charger and battery heat slightly during
charging, charge the battery in a place not exposed to direct sunlight; where the
humidity is low and the ventilation is good.
19. Use the exploded assembly drawing on this handling instructions only for
authorized servicing.

PRECAUTIONS FOR CHARGER

1.
Always charge the battery at an ambient temperature of 0–40°C. A temperature of
less than 0°C will result in over charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that of 20 – 25°C.
2.
Do not use the charger continuously.
When one charging is completed, leave the charger for about 15 minutes before
the next charging of battery.
3.
Do not allow foreign matter to enter the hole for connecting the battery.
4.
Never disassemble the battery and charger.
5.
Never short-circuit the battery.
Short-circuiting the battery will cause a great electric current and overheat. It
results in burn or damage to the battery.
6.
Do not dispose of the battery in fi re.
If the battery is burnt, it may explode.
7.
Using an exhausted battery will damage the charger.
8.
Bring the battery to the shop from which it was purchased as soon as the post-
charging battery life becomes too short for practical use. Do not dispose of the
exhausted battery.
9.
Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or infl ammables into the charger air ventilation slots will
result in electrical shock hazard or damaged charger.

SYMBOL

WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
Read all safety warnings and all instructions.
11
English