Jaen Siracusa 16E+ Manuel - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Jaen Siracusa 16E+. Jaen Siracusa 16E+ 20 pages.
Imprimer la pageSpecifications
Variable Materials:
Wood: Usually maple, walnut or sapele for the back and sides, and spruce for
the top; maple for the neck. The fretboard, peghead face, bridge and tailpiece
are usually made of ebony. The pickguard skin is made of ziricote most times (its
core is always carbon), and the pickups are usually made of ziricote or ebony.
The bindings are usually maple, walnut, ovangkol or sapele, and the purfling is
usually fiber.
Most metal parts are gold plated.
Some guitars substitute the mother-of-pearl inlay material for wood.
The finish is either nitrocellulose or epoxy+Tru-oil.
Case: Hiscox or custom made by Artur Benedykt.
Fixed Materials:
Carbon: The truss rod access cover and tuning machines cover are both carbon
with a glued lamination of wood, usually ebony. The peghead has two internal
carbon reinforcements where the tuners are attached. There is also a carbon
skeleton inside the bridge saddle that stiffens it. The bridge feet are hollow,
usually made of ebony, and joined by two carbon fiber rods. The pickguard has a
carbon core hidden below its wooden skin. There are other internal pieces
where carbon is used.
The frets are Jescar FW47104SS, Stainless Steel.
The kerfing is usually made of mahogany. It is installed using a proprietary
method that makes the sides very strong without adding extra mass.
The nut is made of cow bone.
The tuning machines are Schertlers, modified so that their mechanisms are
hidden inside the peghead, usually with ebony knobs.
The tailpiece bracket is made of aluminum covered with a wooden veneer,
usually ebony.
The main pickguard bracket is made of blackened steel. The neck bracket is
made of brass.
Magnetic pickups: Neck PU with 50 mm and Bridge PU with 52 mm polepiece
spread. The neck pickup can work in enhanced single coil mode.
Potentiometers: long rotational life (100.000 cycles), conductive polymer.
Measurements:
Neck: For non-custom instruments, the scale is 25.5" (648 mm), while the nut
width is 1
" (43 mm).
11/16
Soundbox depth: usually around 65-70 mm.
Siracusa 15E+: 15 inches at lower bout.
Siracusa 16E+: 16 inches at lower bout
17