Game ready 590810 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Game ready 590810. Game ready 590810 2 pages. Hand wrap - sleeve #590810 hand wrap - coverlet #590815

Imprimer la page
Hand Wrap =
Hand
+
Heat Exchanger
Coverlet
Black Side with
Fig 1
Game Ready Logo
Facing Down
Hand
+
Heat Exchanger
Sleeve
Fig 2
Game Ready Logo
Facing Up
Fold Heat Exchanger in half
matching the blue sides
and feed fitting through neck
Fig 3
Hand
=
Hand
Black side of
Heat Exchanger
facing up
=
Inspect the Heat Exchanger
to ensure that there are no
kinks, twists or distortions
®
Hand Wrap - Heat Exchanger Insertion
Fig. 1 Place Hand Single-Use Coverlet on a flat surface with the logo side
down. Insert Heat Exchanger into the Coverlet with blue side up through
the elastic neck opening. (Blue side of Heat Exchanger should match
blue side of Coverlet and Sleeve)
Fig. 2 Place Hand Sleeve on a flat surface with logo side up. Insert Heat
Exchanger into the Sleeve through neck of sleeve with the black side
facing up. (Blue side of Heat Exchanger should match blue side of
Sleeve) Feed the connector fitting through the neck opening making
sure Heat Exchanger lays flat inside sleeve.
Fig. 3 Make sure the Heat Exchanger is flat inside the Sleeve with no folds or
creases. After assembly, lay the blue side up, make sure the wrap is flat
and smooth.
Hand Wrap - Heat Exchanger Removal
Hand Wrap - Coverlet
1 Disconnect the Connector Hose from the Wrap
2 Gently pull out the Heat Exchanger
Hand Wrap - Sleeve
1 Disconnect the Connector Hose from the Wrap
2 Gently pull out the Heat Exchanger through the opening, while pulling
the Heat Exchanger fitting back through the neck opening.
Hand Wrap - Sleeve
#590810
Hand Wrap - Coverlet #590815