Gree GWHD(30)ND3CO Manuel d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Gree GWHD(30)ND3CO. Gree GWHD(30)ND3CO 16 pages. Multi ductless inverter
Également pour Gree GWHD(30)ND3CO : Manuel du propriétaire (11 pages)

Imprimer la page

Gree GWHD(30)ND3CO Manuel d'installation

SUGGESTED TOOLS

• Standard Wrench

• Adjustable/Crescent Wrench

• Torque Wrench

• Hex Keys or Allen Wrenches

• Drill & Drill Bits

• Hole Saw

• Pipe Cutter

• Screw drivers (Phillips & Flat blade)

• Manifold and Gauges

• Level

• R410A Flaring Tool

• Clamp on Amp Meter

• Vacuum Pump

• Safety Glasses

• Work Gloves

• Refrigerant Scale

• Micron Gauge

INSTALLATION SITE INSTRUCTIONS

Step 1

Installation Site of Indoor Unit

Select a site that allows for the following:

• Ensure the installation complies with the installation minimum dimensions and meets the

minimum and maximum connecting piping length and maximum change in elevation.

• Air inlet and outlet will be clear of obstructions, ensuring proper airflow throughout the room.

• Condensate can be easily and safely drained.

• All connections can be easily made to outdoor unit.

• Indoor unit is out of reach of children.

• A wall strong enough to withstand the full weight and vibration of the unit.

• Filter can be easily accessed for cleaning.

• Leave enough free space to allow access for routine maintenance.

• Install at least 10 ft. (3 m) away from the antenna of TV set or radio. Operation of the air

conditioner may interfere with radio or TV reception in areas where reception is weak.

An amplifier may be required for the affected device.

• Do not install in a laundry room or by a swimming pool.

• Determine if condensate pumps are required to properly drain condensate water from

the indoor units.

Installation Site of Outdoor Unit

Select a site that allows for the following:

• Outdoor location meets all minimum installation distances defined in the Installation

Dimensions section.

• Sound from outdoor unit will not annoy neighbors.

• All connections can be easily made to indoor unit.

• Air inlet and outlet will be clear of obstructions to ensure proper airflow.

• Wall or roof is strong enough to withstand the full weight and vibration of the outdoor

unit (for wall or roof installation only).

• Outdoor unit is out of reach of children and does not obstruct walkways.

• Outdoor unit is not exposed to direct sunlight or strong wind.

• Maintenance and repairs can be easily performed on the outdoor unit.

• Ensure the installation complies with the minimum and maximum connecting piping

length and maximum change in elevation criteria.