Maiwe MIEN2204 Series Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Maiwe MIEN2204 Series. Maiwe MIEN2204 Series 17 pages. Unmanaged industrial ethernet switch
Imprimer la page
MIEN2204 Series Unmanaged Industrial Ethernet Switch
LINK 3/4
Each Ethernet RJ45 port has two indicators. The yellow indicator is the
port rate indicator and the green indicator is the port connection status
indicator.
10/100M
（Yellow）
LINK/ACT
（Green）
2.4. Ethernet Rj45 Port
Each RJ45 port has an adaptive function and supports automatic
MDI/MDI-X connection. The switch can be connected to terminal equipment,
servers, hubs, or other switches using straight-through network cables or
crossover network cables. Each port supports IEEE802.3x adaptive, so the
most suitable transmission mode (half duplex or full duplex) and data rate
(10Mbps and 100Mbps) can be automatically selected (the connected device
must also support this feature). If the device connected to these ports does not
support auto-adaptation, the port will force itself to work at the same rate as the
other party to avoid full/half duplex mismatch. The transmission mode will
default to half duplex and flow control will be automatically disabled.
Fiber port status LED
The port has established a valid
On
network connection
Blinking
Network activity on the port
off
No valid network connection
Ethernet RJ45 port status LED
On
100M working state ( 100Base-TX)
Off
10M working state (10Base-T)
The port has established a valid
On
network connection
Blinking
Network activity on the port
The port doesn't establish a valid
Off
network connection
- 5 -