Gree GDN50AP-A3EBA1A Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gree GDN50AP-A3EBA1A. Gree GDN50AP-A3EBA1A 19 pages.

Press this button to set continuous dehumidify.

Note: The drain hose must be installed to use the CO mode. Otherwise,

unit will stop when the water bucket is full.

Press this button to turn off the Filter Cleaning Indicator. (When the dehumidi-

fier has been operating for 250 hours, the Filter Cleaning Indicator will light

up to remind to clean the filter.)

Other Instructions

If the bucket is full or not locked into place for over 3 min, a buzzer will go off

for 10s to remind you to empty the bucket or put it back into the correct

place.

2. Auto Stop

When the bucket is full, removed or not placed correctly or the humidity is

5%lower than the set humidity, the unit will automatically stop.

3. Memory Function

If power is lost, all of the control settings are remembered. So when power

is restored, the unit will start back up in the settings it was in when the

power was lost.

4. Bucket full light

This indicates that the bucket is full, removed or not placed correctly.

5. Clean the Filter indicator light

When the dehumidifier has been operating for 250 hours, the Filter Cleaning

Indicator will up to remind user to clean the filter.

6. On light

This indicates that the dehumidifier is on/off. When the dehumidifier is on,

the On light can be turned off or on by pressing "Filter" and "△" together

for 3 seconds. The light blinks continuously to show the bucket is full,

removed or not placed correctly.